Need help - problem with water heater
Hi there, We're going on a trip on Thursday and I'm experiencing a problem with our water heater. It is an Atwood model, 6 gal gas. We have a 2015 Starcraft 28BHS. The heater worked fine last ...
Forum Discussion
There is no pilot on a DSI water heater.
The burner is coming on, but the flame sensor does not see it.
Clean and adjust the ignitor/flame sensor.
Clean connector for the ignitor on the circuit board.
Inspect the porcelain around the ignitor for cracks.
Have circuit board tested. If bad replace with Dinosaur Electronic version.
Yes, it could be low propane pressure issue.
The burner is coming on, but the flame sensor does not see it.
Clean and adjust the ignitor/flame sensor.
Clean connector for the ignitor on the circuit board.
Inspect the porcelain around the ignitor for cracks.
Have circuit board tested. If bad replace with Dinosaur Electronic version.
Yes, it could be low propane pressure issue.
