Please Help..
I was living in my camper for 8 months. I disconnected my water pump and bypassed it. Now I am trying to connect it back up for normal operation. I feel like I am missing something..? I have a 2011 Ke...
Forum Discussion
webbwd wrote:
Thanks for replying. I wish I could explain it better... Ill start from the back of the panel.. I have a city connection and the Fresh water connection, vent. That Panel was removed and blocked, I ran water from underneath the TT. On the fresh water tank I have 3 tubes. I am pretty positive 1 is the fill tube, one goes to the pump (bottom one) and top one, i think is the vent tube...? The outlet that feeds the rest of the TT is a harder line. That main line is disconnected as well as all other lines on the pump outlet side. I know it is simple.. but Im missing something. Does the City Water, when connected properly go through the water pump? Or should it have a T to bypass the pump?
City water uses the line that comes out of the pump. It should be tied in somewhere. It doesn't actually go through the pump, but it will fill the line all the way back to the pump. There is (or should be) a check valve in the pump that keeps the city water on the outlet side of the pump.
I have to ask.... why on earth did you do this? Why not just tie to the city water inlet?
