Poor Appliance Installation
such poor workmanship!! the cover for the furnace kept falling off because of stripped screw holes, so it was time for some investigation turns out the hole for the furnace was too big and...
Forum Discussion
BB_TX wrote:
Give an untrained worker a powered screw driver and tell them to put the screws in and they will run them in until they bottom out and then a few more turns for good measure.
yeah, and if they miss altogether, well qc will catch it later on
yeah, sure.
in my first tt, the fridge actually came out of its "cabinet". nothing was holding it in except the gas line and gravity. the screws were stripped out too. same with the stove in that tt
