Forum Discussion
okan-star
Jun 24, 2014Explorer
I had a Penguin 11000 on my 97`lance legend 500 , Honda 2000 a my house @ 2800 ft elv would not run it , would start it sometimes , but after head pressure built up in the compressor the Honda breaker would pop, that was with no convertor or anything else running
Tried a supco spp6e, helped a little , but still would not run
The penguin is 13.7 amps total if I remember, I sold it for 350.00
The new mach 8 cub is 11.7 total
The polar cub with R-410a Freon was 11.5 total
The old good polar cub "D" series was 8.9 total
You need a bigger gen , to run your AC
I changed my AC to a new colman mach 1 power saver
Its 9.5 total, it runs well in eco mode at elevation and with the converter on , its as low an amp one made now, but its not low profile
Tried a supco spp6e, helped a little , but still would not run
The penguin is 13.7 amps total if I remember, I sold it for 350.00
The new mach 8 cub is 11.7 total
The polar cub with R-410a Freon was 11.5 total
The old good polar cub "D" series was 8.9 total
You need a bigger gen , to run your AC
I changed my AC to a new colman mach 1 power saver
Its 9.5 total, it runs well in eco mode at elevation and with the converter on , its as low an amp one made now, but its not low profile
About Travel Trailer Group
44,056 PostsLatest Activity: Dec 27, 2025