Problem # 2 Hot Water Heater
I have an Atwood G6A-Seven hot water heater in my 2002 Jayco Hybrid. It lights very easy but the burner only stays on for 2 or 3 minutes before going out. Sometimes when I turn it from "pilot" to "on"...
Forum Discussion
enblethen wrote:
There is water in the tank!
Verify that the thermal couple is directly in the flame. Replace thermal couple.
I replaced the thermocouple. Should the pilot flame be orange or blue? I cleaned the pilot assembly and the flame got smaller but bluer. now the thermocouple is not directly in the flame. No change in amount of time burner burns. I'm really new at this so how do I know whether or not there is water in the tank. All the valves seem to be open and I have turned on the hot water lines.
