Raising TC Off Bed
Newbie here with a question about my first truck camper. I have read that you can add rubber mat to the floor of the truck bed to raise the TC. This appears primarily to keep the shelf from contact...
Forum Discussion
I had to raise my Lance 3" to clear the roof lights and the rails on new F350.
All you need is "perimeter" support. Meaning only edge of the camper needs support. I used 2.5x6" planks and used screws to hold them around the edges of standard sheet of 1/2" plywood.
All you need is "perimeter" support. Meaning only edge of the camper needs support. I used 2.5x6" planks and used screws to hold them around the edges of standard sheet of 1/2" plywood.
