Raising trailer height
I have an Okanogan travel trailer with caliper axils. I want to raise the trailer height because the H2O and black/grey tanks are to close to the ground for rough roads. Normally on trailers with a ...
Forum Discussion
disregard corrective spelling posters. They are not here to help.
Alternative to the axle 'flip' is lengthening the spring hangers , at the same cost or less. This is the only method for lifting torque flex axles. . Any welder can do it in a flash, just be sure to add x members to the hangers to stiffen the raised units side load stesses. Frame side to side flex is the greatest reason for failure.
Oh, by raising the rig, then for your steps and leveling jacks you will need to carry a step stool and extra blocks.
Alternative to the axle 'flip' is lengthening the spring hangers , at the same cost or less. This is the only method for lifting torque flex axles. . Any welder can do it in a flash, just be sure to add x members to the hangers to stiffen the raised units side load stesses. Frame side to side flex is the greatest reason for failure.
Oh, by raising the rig, then for your steps and leveling jacks you will need to carry a step stool and extra blocks.
