A/C Auto Lo?
Bought our 2019 Jayco 324BHTS a few weeks ago, aside from getting it loaded up and keeping it plugged it, we haven’t really done much to it or been in it. Today it finally got hot, thermostat was r...
Forum Discussion
wnjj wrote:thirtydaZe wrote:
So what i have is an AirXcel thermostat.
The cool function has hi, low, auto, auto hi, auto low.
The lo function does not do anything besides run the compressor.
From what wveryone has been saying, im assuming its a warranty issue.
So does the fan run by itself in 'Fan lo' mode?
The RV wiring should have 3 wires used for cooling:
1. Cool - runs the compressor
2. Fan low - runs the fan low speed
3. Fan high - runs the fan high speed
In 'Fan low' mode the thermostat turns on #2.
In 'Fan high' mode it turns on #3.
In 'Cool low' mode it turns on #2 always and #1 when cooling is needed.
In 'Cool high' mode it turns on #3 always and #1 when cooling is needed.
In 'Cool low auto' mode it turns on #2 and #1 when cooling is needed.
In 'Cool high auto' mode it turns on #3 and #1 when cooling is needed.
If wire #2 is not connected, there will be no fan in any of the 'low' modes.
great question, thanks for bringing it to my attention. will check it out.
