Good afternoon guys. I have to bump this back up to the top. I apologize for the delay in getting back to you all. Today is the first time that I have had the opportunity to get back out to the trailer.
My Heater made by Suburban. Im honestly not sure which model. My Manuel says its for Gas Models SF20Q-SHD2542Q
I also called the dealership asking the Tech to walk me through some trouble shooting and he wasn't much help. Pretty busy I imagine.
Recap:
-The propane is getting to the trailer with no air in the lines. All burners on the stove run fine at the same time.
-I have plenty of power. Im plugged into 30A in storage.
-When I turn on the furnace, the fan starts automatically. When I run outside I can hear the ignitor cycle on and off 3 times and I can smell propane coming out of the heater unit. After 3 attempts the fan will blow for an additional 3-5 minutes and then the whole unit will shut off and I'll have to reset.
There has to be something stupid that I am missing on my end. The unit is brand new and I just took delivery of the trailer in June of this year. Never tried to run the unit before.
I unscrewed the cover below the oven and tried to see if I could get a peak. Its tucked up under there good and I can't see anything except a few wires. All connections are hidden. On the exterior I only have the combustion chambers visible.
AG