Spring load handlers ?
I just bought a 2012 2500 HD and it has some springs attached to the rear leaf springs. I put 1400 lbs in the bed and it only went down a few inches if that. I think these springs or hurting the unlo...
Forum Discussion
I can't imagine it being a worse ride on bad freeway dividers. The rear has no give what so ever on quick drops like that. It feels like a F550 suspension would feel unloaded. I can't help but feel these are hurt the unloaded ride of this truck. I'm not a mechanic but I want to take the off is it a difficult job.
Also I measured the fender walls from the tires and the back is 4.5" higher than the front is this normal. I think it's putting pressure on the front suspension and hurting the ride up front also. The guy who had the truck before me had a large fith wheel and all I have is a pop up and 20ft bass boat. Now down the road I will get a TT but nothing very large though.
Thanks Techeman
I really appreciate all the help from you guy.
And a special thanks to you Jim for helping me post the pictures.
Also I measured the fender walls from the tires and the back is 4.5" higher than the front is this normal. I think it's putting pressure on the front suspension and hurting the ride up front also. The guy who had the truck before me had a large fith wheel and all I have is a pop up and 20ft bass boat. Now down the road I will get a TT but nothing very large though.
Thanks Techeman
I really appreciate all the help from you guy.
And a special thanks to you Jim for helping me post the pictures.
