Weight Distrobution Hitch Repair
I have a husky setup with the round bars that go in under the hitch.. the opposite side is attached to the a frame with a chain that you use a breaker bar to lock. at the point where the round bars...
Forum Discussion
TUCQUALA wrote:
This is what you are after, for the round bars:::
http://www.etrailer.com/Accessories-and-Parts/Draw-Tite/3311.html?feed=npn&gclid=CNKCs-aAsb0CFQqCfgodqmkAZg
thanks that’s what I needed http://www.etrailer.com/Accessories-and-Parts/Fastway/FA94-02-1059.html
shows me a good explosion of what all makes those things work... I’m thinking I just need to take them off and bend them i don’t see any springs it just seems to be the clip itself that provides the force to push them back in. which isn’t much because the things are about a quarter of the thickness of a paper clip.
i probably wore them out because i wear thick gloves to keep the grime off my hands when i hitch up and didn't realize how hard i was pulling them back.
