Rebuild is moving forward! pj
As I announced that I was going thru with a rebuild a number of months ago...I need to do an update. The RV rebuild place here in Tacoma had a fire. I stopped by the following week and found out t...
Forum Discussion
Monday April 13. Dropped off the new escape hatch and the comment was this is a tough unit, should be easy to install. The old hole will need to be narrowed side to side by 1.5 inches and lengthened going aft to accomdate the new hatch.
Progress report: The back end has been filled in...old window hole and hatch, plus new wood across the bottom were the bumper mated in.
Gap is for the genset. Note the new wood and strenght in which it is installed.
Right side and the box hanging under is the step.
Right corner.
Left side..black is the tank cover.
Side of cab over has new inside board, more will be replaced back to the cabinet...so the inside will have a white texture on that side and be the original Lance board on other side.
I will be going back in morning for another look as they told me that things will move along now that they have had a delivery of materials after the fire...Fires sure do cause some issues! They are hoping to have it done and to me by end of month! That would nice.
Progress report: The back end has been filled in...old window hole and hatch, plus new wood across the bottom were the bumper mated in.
Gap is for the genset. Note the new wood and strenght in which it is installed.
Right side and the box hanging under is the step.
Right corner.
Left side..black is the tank cover.
Side of cab over has new inside board, more will be replaced back to the cabinet...so the inside will have a white texture on that side and be the original Lance board on other side.
I will be going back in morning for another look as they told me that things will move along now that they have had a delivery of materials after the fire...Fires sure do cause some issues! They are hoping to have it done and to me by end of month! That would nice.
