Rebuild is moving forward! pj
As I announced that I was going thru with a rebuild a number of months ago...I need to do an update. The RV rebuild place here in Tacoma had a fire. I stopped by the following week and found out t...
Forum Discussion
PJ, where you wrote this on the last page.... "Then I made the under lament for the new Corian top, that I may get on the 10th. The far edge against the refer was 5/8 lower on the front edge, cut a wedge and then 1/4" board over the whole. You can see the wedge...no wonder the old top flexed so much."
Mine was exactly 5/8" lower in the same place... now why is it designed that way.... my 1161 is older than yours.
You have a beautiful camper now (again)...
I'll bet you won't have tail gate'rs at night... the back end will blind them.
Yes... I am jealous!
Thanks for sharing
chet
Mine was exactly 5/8" lower in the same place... now why is it designed that way.... my 1161 is older than yours.
You have a beautiful camper now (again)...
I'll bet you won't have tail gate'rs at night... the back end will blind them.
Yes... I am jealous!
Thanks for sharing
chet
