Forum Discussion

FireRob's avatar
FireRob
Explorer
Sep 21, 2014

Removing the Stickers/Decals from outside of TT?

Was just curious on thoughts and opinions of removing the decals from the "outside" of a fiberglass TT?

Wife and I both agree were not crazy about all the Texas flare on the "out side" of our TT but we were just willing to live with it. Then a friend asked if it was painted on and when I told him they were decals/stickers he asked why I don't just take them off....

This is a new trailer that we should take delivery of this upcoming Friday. Figured if its going to be removed better do it before the sun has a greater chance of making a color difference if we do decide to take them off. Don't want to completely strip all markings just the Texas flag at the side rear and logo of the longhorns and star on the front and very back. All the stripes and words can stay. I know I am a terrible Texan for wanting to do this but...

Thoughts opinions and tips appreciated. Here is some generic dealer photo's of the trailer





  • FireRob wrote:
    Wife and I both agree were not crazy about all the Texas flare on the "out side" of our TT but we were just willing to live with it.


    I'd remove it too.

    As suggested, heat gun. Just don't forget to wax after as there is probably no wax under those decals...possibly no wax on the entire TT.
  • If you do this, do it when it's new because even after just a few years it will leave a ghost image behind.
    I removed the graphics on the from of mine with a heat gun. Just hold the heat gun about 8~10" away and apply a continuous pull away from the surface. It comes off clean and fairly quick. It took about 30 minutes to remove all the graphics from the front of our TT (then I had it painted).