Review of the Torklift International FastGun
After over a dozen trips and nearly two years of use, I finally wrote a review of the Torklift FastGun. The review includes my experiences with the "FastGun Squeak" and getting the right amount of ten...
Forum Discussion
FastGuns are very easy to have at too high a tension and this can damage the camper. The correct procedure is to measure the amount that the threaded section pulls out from the Fast Gun when the lever is lowered. It should pull out no more than 1/4" from the main body to get 300 lbs. of load support. More than 1/4" and the load will be greater than 300 lbs. on the camper's plates and where they attach to the structure of the camper.
