scissor steps
My scissor steps are not parallel when extended. If I extend them so the middle step is level, the upper slants down away from the camper while the lower one slants back the other way. I always though...
Forum Discussion
Sue.t's top picture above shows the issue with the top bracket tilted down which allows the step to tilt. If the top bracket is perpendicular to the back of the camper the other steps should be level except for play in the scissor mechanism.
I can't see that the angle of the top bracket matters because there is a hinge point about 2" out from the mounting bracket, so the frame of the steps themselves will adopt any angle it wants to regardless of how the top bracket is sitting
