Shower valves upgrade PICTORIAL
My so called "luxury" camper come with decent kitchen faucet, but cheap bathroom and outside shower valves. Hated those things and they come some freeze damages so was on the market for good replace...
Forum Discussion
Unfortunately I don't have model for external shower and there is nothing written on it.
I bought it on ebay from seller who does not offer any items at this time, so have no idea where it come from.
Now thinking about it, all those holes in outside shower allow for the air to enter the camper as the door has no gasket.
Under the sink cabinet has sealed door, but I don't like the idea about cold air circulating under my sink and shower, so will seal the upper holes that were used for original hose. You can see under the sink how I sealed gap to electrical cord compartment for the same reason.
The sink holes covers are design for bigger holes and might not hold too well vertically, but I might give it a try. If not, caulk will work.
For hose clamps on pex, I do have 150psi city water pressure, what always work well for testing RV plumbing.
I bought it on ebay from seller who does not offer any items at this time, so have no idea where it come from.
Now thinking about it, all those holes in outside shower allow for the air to enter the camper as the door has no gasket.
Under the sink cabinet has sealed door, but I don't like the idea about cold air circulating under my sink and shower, so will seal the upper holes that were used for original hose. You can see under the sink how I sealed gap to electrical cord compartment for the same reason.
The sink holes covers are design for bigger holes and might not hold too well vertically, but I might give it a try. If not, caulk will work.
For hose clamps on pex, I do have 150psi city water pressure, what always work well for testing RV plumbing.
