Slide opens unevenly
Springdale 311RE. My large slide operates as it should, but when it reaches the open position and the slide motor clicks-ratchets and I release the switch, one side of the slide is open all the way an...
Forum Discussion
Check the shear bolt for the small gear on that side. The head busted off one end of the bolt on my last TT and the rest of the bolt stuck. This allowed the gear to turn slightly on the shaft and do exactly as you describe.
You can see the bolt going through the square shaft just to the left of the gear in this image:
You can see the bolt going through the square shaft just to the left of the gear in this image:
