Slide opens unevenly
Springdale 311RE. My large slide operates as it should, but when it reaches the open position and the slide motor clicks-ratchets and I release the switch, one side of the slide is open all the way an...
Forum Discussion
Duane4238 wrote:
Jerry, Thanks for the reply. The slide has always worked just fine. The only thing that I can think of that may be different is the trailer isn't on its stabilizers, yet, and is sitting kind of up in front, down in back for the winter for rain and snow runoff. I have to level it for the season and put my blocks under it, too. I'll try that first to see if that's the problem. If not, I have a trailer dealer within 5 miles so I'll call and have a tech come out and take a look. Happy Easter.
Duane
This sounds like a good plan. It is best to have trailer level when extending/retracting the slides. A slide is a heavy box, that can shift a little, if too high on one end. With warmer temps, and trailer level, it may be just fine again.
Jerry
