Slide will not move out

Good evening Dave.

Mike Tassinari from the North-East Truck Camping Jamboree

This post has nothing with your issue but I just wanted to say "HI" as I have not see you and a long time. Happy Camping

Mikeeeeeeeeeeeeeeeeee

I have a TT where a working slide was intermittent via the switch. Finally chased it down to a fouled ground wired into the slide switch. Fixed that ground and it has been working fine ever since.

Check to see if you have a selonoid running from your battery, you may have a loose connection for the control of your Slideout, that happened to me on my trailer.

New batteries this year charged all night... will see.....We are off one way or the other...thanks for the all the help off to Q in Az
Dave

Dave, sounds like your batteries need charging or changing out.

Generator problem could be the same as slide - low battery(s). Charge them and give it a try.

Did you check the oil level on the generator? If it's low the sensor won't let it start.

Got it to work with plugging into 110.....then with just battery...great Never a dull moment the Generator decided not to kick over (Onan 2500) Plenty LP, fuse looks good, changed Air filter, any ideas Me an the TC are getting old

If the manual crank is not working this would not necessarily be an electrical issue. It could be two things, one of them being electrical but sounds more like binding or an alignment issue. The clicking is probably because of the binding to where to slide motor is made to have a clutch similar to a battery operated hand drill.

Had the same trouble with my lance was a bade fuse hid in line in the wiring.
as well as the breaker in the panel.
Ken