So who thinks this is a good idea?
Ram Patents Adjustable Loading Ramp System for Trucks
Forum Discussion
I bought a bigger-ish (is that a word?, about 12,000 GVWR) flatbed trailer for hauling my Cabin Truck on.....hauled by the F550 plow truck.
This trailer came with ramps and sleeves for the ramps. Ramps are good and stout and rated for about 150% of the loads I put on them. However, they have become (over 6 years) warped somewhat if not bent and as a consequence, they don't fit in the sleeves.
For this trailer, its no problem as I just chuck the ramps up on the flatbed....would that work with the Dodge idea? I'd expect the ramps to get, literally, bent out of shape even in approved use.
This trailer came with ramps and sleeves for the ramps. Ramps are good and stout and rated for about 150% of the loads I put on them. However, they have become (over 6 years) warped somewhat if not bent and as a consequence, they don't fit in the sleeves.
For this trailer, its no problem as I just chuck the ramps up on the flatbed....would that work with the Dodge idea? I'd expect the ramps to get, literally, bent out of shape even in approved use.
