Thanks for the replies.
The camper is a 02 Lance 1130
The sewer connection comes straight out of the bottom of the black tank, so that is one area that I have to be careful to not lower the back of the camper too low.
From what I can figure so far is that the front must be about 24" + so that the rear can be high enough to get to the sewer connection.
Jack stands that I have found so far are just little too short so it looks like some kind of saw horse.
I am open to any suggestions so no one way of doing it is the best so far.
I dont think it will get heated so please any suggestions are good
