Socket for 2016 CTD front fuel filter cap
Getting ready to change the front fuel filter and am reading many use the 1-1/8" 6-point socket and that seems to work fine, but I'm also reading that the correct socket is actually metric, but gettin...
Forum Discussion
Cummins12V98 wrote:
"I think I used an 1 1/8" socket too but long term it's probably best to use the proper metric socket. It gives me an excuse to go to the local tool depot...."
See below, sorry no "EXCUSE" to get the MM socket. ;)
From conversion chart, "28mm, About 1-1/8 inch, 1.1024"
From what I've read, it seems like more are using the 1-1/8" over the 28mm. Both seem to work fine.
