I have all the rotten wood pulled up now and then I cleaned all the luan from the foam core.....I made templates for the missing wood out of 8.5x11" pieces of paper and have cut new wood to fit the spots where it's missing...next I "painted" all the wood that was left with "Rot Doctor CPES" to stop any further rotting and to kill any mould that might have made it's way into the wood.
I've also got new timber to go accross the door for the step to attach to, and a few new blocks used for mounting the body to the frame....once the new plywood is in for the floor I'll drill out the holes for the floor and frame mounts and put the vinyl back down.
..I'd post pics but I don't think I can attach photos to a reply unless they are linked, which isn't going to work for me.....
T.
