Good news on the photo...let's give it a try...
This is the spot in front of the door.....I used a small circular saw to cut away the rotten stuff and then cleaned it up...at the bottom is a black hollowed out spot with no foam, and that's where the piece of wood goes for the door...I have that cut out and treated with end cut ready to install...you can see near the top of the photo that the luan wasn't rotten but it did get wet..that's one of the areas where I put the "Rot Doctor" to waterproof it and stop the rot.
Tonight I'll start to reassemble so I'll get more shots.
T.
