Some rear suspension questions
So my 2007 2500HD classic has a 2" Cognito Leveling kit on it (I know leveling kits aren't good for TCs but it was the only way to fit 285 tires rated at 3750 each). For the past 8 years I've had Supe...
Forum Discussion
I dont know if applicable but on our Ford one of the differences between 4x an 2 wheel drives is the addition of rear factory 2" blocks. I am not a fan of blocks either but that is the way it came and Ive never had issue.
If Chevy same, Id opt for the factory blocks (and longer u-bolts) again if applicable.
I gather now the rear is lower or when under load since removal of the SS- Not knowing or familiar with the front kit, is there a way to lower an 1"? Unless this is more about increasing engagement time/distance of rear.
If Chevy same, Id opt for the factory blocks (and longer u-bolts) again if applicable.
I gather now the rear is lower or when under load since removal of the SS- Not knowing or familiar with the front kit, is there a way to lower an 1"? Unless this is more about increasing engagement time/distance of rear.
