Forum Discussion
AH64ID
Jun 27, 2014Explorer
Here is how my setup looks. I have the L brackets up 1 from level because when fully loaded I am near capacity of these 1200lb bars, and should sell this hitch for a 14K setup.
The 1" riser ball, which only adds 5/8" or so was more for leveling than tension but it did both. I could consider removing it now with the TT siting 3/8" or so lower with the EZ-Flex, but I haven't.
The bracket jackets, hard to see in this photo, do help when the bars are slightly off parallel because plastic wears and makes a level contact surface.
The 1" riser ball, which only adds 5/8" or so was more for leveling than tension but it did both. I could consider removing it now with the TT siting 3/8" or so lower with the EZ-Flex, but I haven't.
The bracket jackets, hard to see in this photo, do help when the bars are slightly off parallel because plastic wears and makes a level contact surface.
About Travel Trailer Group
44,029 PostsLatest Activity: Jan 28, 2025