stuck hitch
After parking my TT this weekend, I couldn't get the ball to slip off of the joint. I raised the tongue so high the rear end of my TT was leaning backwards. I made sure the safety mechanism on the the...
Forum Discussion
RTrider wrote:
If everything is lubed properly, its just the pressure on the mechanism that won't let the ball release. Just pull forward or back an inch and try again.
X2. This worked for me once when I was unhitching on a bit of a incline. Put the truck in R and just let it back up an inch at most then in D and just let the break out so it just slightly tried to move forward. Not sure which did the trick but it worked and TT came right off the ball on the next try.
