Tailgate pad to carry bikes

Have not had one but I've seen a rack for the front of a TT that held bikes above the battery and propane tanks.
Looked it up, its called a Stromber cc275.
Wal Mart has them.
Not what you asked about but could be an option if you don't have room on the rear of the truck.

If you find the pad doesn't work, you can consider adding a front hitch and using a wheel holding carrier from below, that's what i did for it current trip to take 4 bikes and the trailer. Helps restore weight to the steering wheels as a bonus.

I am specifically interested in a tailgate pad solution.

bikeandcamp wrote:
I am thinking of using a tailgate pad to transport bikes while towing my TT.

OK, so the OP apparently wanted to restrict conversation to just tailgate pads but since I've never heard of or ever seen one I would like to ask just what the advantage is in using one when one can simply park the bikes in the back of the truck? :h A few pieces of scrap plywood and I was able to carry four bikes in the back of our Silverado, along with a set of fresh water Aquatainers, 5 lb propane tank for powering our Weber Q grill, under awning ground mat, and still had space for other sundry items.



Serious question - what's the "magic" with one of these tailgate pads? :@

Please ignore the peanut gallery. While I appreciate you wanting to limit the conversation, sometimes folks come up with some pretty clever ideas so I hope you are open minded.

I have personally never seen anyone using the tailgate pad. I seriously considered trying this but then didn't do it for the same reason you are concerned about. Backing up sharply is more of the issue that I thought about. I would have had to remove the bikes prior to pulling into a tight spot. I also read that the pad is not intended for long distance use.

If you do use a pad one thing you could consider is a longer receiver shank. I have a longer one so that I can open my tailgate with the trailer hooked up. Not sure if that would provide enough clearance though.

Below is the solution I finally settled on. It still leaves plenty of room to carry other things in the bed. But if you have more than 2 bikes I can see why you'd be looking at the tailgate pad.

My kids used one. As far as I know, there were no problems with tight turns.

Campfire Time wrote:
I have personally never seen anyone using the tailgate pad. I seriously considered trying this but then didn't do it for the same reason you are concerned about. Backing up sharply is more of the issue that I thought about.

I've never seen one of these tailgate pads either but anytime we camp our truck gets filthy so my immediate reaction is a pad like this, with sand & dirt all over the tailgate, would only serve to destroy the finish, just like sandpaper would. :E Seems to me it would be a lot simpler, a lot cheaper, and a lot safer to just put together some sort of bike rack that would fit the back of the truck. This is the one I built out of scrap plywood for our '06 Silverado that would hold 4 bikes upright & totally securely.



Once our boys got older and we no longer had the need to drag bikes along camping with us I rebuilt it, cutting it down in size, and now use it to hold my fresh water Aquatainers, hanging it off the garage wall where the 'Tainers can air dry between camping trips.

SoundGuy wrote:

I've never seen one of these tailgate pads either but anytime we camp our truck gets filthy so my immediate reaction is a pad like this, with sand & dirt all over the tailgate, would only serve to destroy the finish, just like sandpaper would. :E

Actually the pads appear that they would do a reasonable job of protecting the truck. My concern is how much the bikes would bounce around on a longer trip. I've never seen anyone actually use one of these on the freeway.
Yakima tailgate pad.

I originally built something like you did but with PVC piping. My issue was that I have an Extang Solid Fold Tonneau cover that I'd have to remove when carrying the bikes. And that thing is heavy. So I came up with the arrangement in the photo above. Cover folds back, bikes go in. Get to the site cover can be locked again. No need to remove the cover.

OP,

The tailgate pads are quite popular out here in CO and I see them a lot. I have also seen a number of the tailgate pads being used with a tow behind TT, in fact saw one just yesterday traveling down I70. I do not have one myself so yes, I'm violating your original post request. ;)

Why don't you just lay a very thick blanket or two over your tailgate and set two bikes into the "tailgate" position to the outmost corners of the tailgate. Hook up your TT and in a very large and open parking lot, make some calculated tight turns with someone keeping watch. That way you will know your specific setup and if it will work for you or not before spending the money on a tailgate pad.

I haven't bought a specific pad, but I've used a moving blanket to achieve the same goal (but cheaper). It worked fine, the bumper will likely stick out further than your handles will. I wasn't happy with the bikes preventing me from using a tonneau cover, so I scrapped that idea. I have them mounted on top of my hard tonneau cover now.