TC Magazines "sub-wing" poll
I was wondering if anyone else was able to check this out? How did you vote? Sub-Wing
Forum Discussion
My Bigfoot has "sub-wings" both sides, and full depth aft of the wheel wells. There is about 1" clearance on each side of the tailgate. Just line the truck up and don't hit anything - it's not that hard really.
In moments of weakness, I think of building my own custom camper. This would have "sub-wings" the full width. Most basement campers have the floor above the wheel wells, if you could extend this right to the edge you would have many opportunities for floor plan improvements. It would require a modified pickup bed or flatbed though. Either cut the rails of the bed down to wheel well height, or a flatbed with storage boxes up to wheel well height.
In moments of weakness, I think of building my own custom camper. This would have "sub-wings" the full width. Most basement campers have the floor above the wheel wells, if you could extend this right to the edge you would have many opportunities for floor plan improvements. It would require a modified pickup bed or flatbed though. Either cut the rails of the bed down to wheel well height, or a flatbed with storage boxes up to wheel well height.
