Thanks!
With the posts about old-timers leaving and all that, wanted to say thanks for all the info gleaned from so many posts over the last few years. Thanks because my 2019 Ram 3500 dually Cummins is si...
Forum Discussion
Camp woof wrote:
TxGearhead, yeah, your posts a while back scarred me! I'll measure and report on fit ...
I wonder how long those fenders are supposed to last before an "oops". Flatbed in the future??
Dave
It didn't take me long to have an ooops. I was helping a friend move some lawn equipment, had my little (5' X 13') utility trailer hooked up, was backing into his driveway, following his directions, traffic was coming around a curve, he kept waving me back to get me out of the road, I jack knifed the trailer. The front corner of the trailer put a 2" cut in the fender. I have a wider trailer on order and bought a 14" hitch extension.
As far as loading the Bigfoot on the truck I just go slow slow. Once past the jacks there is room to pull forward and "square up". Just don't get in a hurry and get frustrated.
Yeah if you think about it put a dimension on here between the front jacks. I doubt it's changed much. I have maybe 3/4" clearance. Maybe. The tailgate opening is close as well. Watch that when backing in. I have a couple short pieces of 1" X 4" covered with astroturf that I slip in there.
