Tips to install leveling jacks
Hope there is a tip out there beside a punch or a starter hole with a small bitt. Need to get about 6 holes started for the two front jacks, decided to position the jacks by cranking them once the...
Forum Discussion
I try to use a punch and pilot hole as you described. I don't know the thickness of material, but it should be real easy to drill.
Can you get to the top side of the lower frame rail for a nut, or is it a rectangular tube so you need to use screws?
Can you get to the top side of the lower frame rail for a nut, or is it a rectangular tube so you need to use screws?
