Trailer Brake or Truck Problem?
2005 Ram 3500 QC, Prodigy P3 brake controller (plug n play to truck harness) 2013 Jayco White Hawk 27DSRL (Dexter Axles/Electric Brakes) Recently did a quick weekend to St. Augustine. Hooked up tra...
Forum Discussion
Not sure why you would think it's the truck and not the trailer but if the trucks fuses are blowing and they are all trailer related I would be looking at the trailer wiring and not the truck!
On a trip back from Florida a moron lost a chest of drawers on I-75. The car in front of me was able to go around them but I had to hit it. By time it was over four other vehicles ran over the debris and pulled off the side of the road. The point is I ended up with wiring issues on the trailer after that and ended up running a new wiring harness from Keystone to fix it. After that I stopped blowing fuses and all was good.
The fuses I kept blowing were parking lights, and the 12V power supply. You could also just have a bad 7 pin connector on the truck or the trailer that is blowing the fuses.
Don
On a trip back from Florida a moron lost a chest of drawers on I-75. The car in front of me was able to go around them but I had to hit it. By time it was over four other vehicles ran over the debris and pulled off the side of the road. The point is I ended up with wiring issues on the trailer after that and ended up running a new wiring harness from Keystone to fix it. After that I stopped blowing fuses and all was good.
The fuses I kept blowing were parking lights, and the 12V power supply. You could also just have a bad 7 pin connector on the truck or the trailer that is blowing the fuses.
Don
