Ventline replacement vent clip

Question

Good evening

I’ve been replacing the vent line wedge shaped covers and encountered an issue,with the clip and the refitting procedure to secure the hinge side , I’ve used a pair of needle nose pliers to squeeze it back into place any input advise appreciated as the clip wiggles, do I need to squeeze it more so.

Clip is called ventline spring clip

Thanks

tourusa · Answer

https://www.walmart.com/ip/Ventline-Spring-Clip-Ventadome-Trailer-Roof-Vent-w-Wedge-Shaped-Plastic-Dome/929691227

2112 · Answer

I couldn't get mine back on when I replaced my 3 vent covers about 4 years ago so I left them off. Do I really need them in place? The vents raise and lower, don't leak, what do the clips do?

tourusa · Answer

Hi, thanks for your reply I did find this link on the how to put the clip back on may have another go with some needle nose pliers see if I can get it tight fix

https://www.etrailer.com/question-88437.html

Forum Discussion

Ventline replacement vent clip

About Travel Trailer Group

Related Content

Replacing vent covers

Heki vent replacement

Replacing the range exhaust vent

Replacing a Roof Vent Cover

Replacing Refrigerator, vents and wiring questions