Water Heater Anoid Rod Isolation
Installed a new heater rod into a Suburban Model SW10DE. Had to use an impact wrench to get drain plug and heater rod out. This is on a 2005 Artic Fox 30U, that may have sat unused for 4 or 5 years....
Forum Discussion
if it's been that long since it has been removed, flush out that tank with a flushing tool. it will need a good flushing. I flush mine twice or so each year. on Edit, if it gets stuck again, try to tighten the nut a little, sometimes it will break lose better than trying to loosen it first.
