water heater on 12 volt with gas
2011 keystone sprinter, I have never used heater or water heater on 12 volt battery with gas, do I have to do anything to get it to light or run on gas?
Forum Discussion
2011 model would probably have electronic ignition.
Light off stove top burners on high to get propane flow/allow LP regulator to react.
Then with water in water heater turn 'gas' switch to ON.
Should hear 'clicking' (ignitor sparking) and then 'whomp' when main flame lights.
20 mins later HOT water.
Light off stove top burners on high to get propane flow/allow LP regulator to react.
Then with water in water heater turn 'gas' switch to ON.
Should hear 'clicking' (ignitor sparking) and then 'whomp' when main flame lights.
20 mins later HOT water.
