Weight Distribution Hitch - not quite right
I'm sure this has been covered, but hoping someone can help? We recently picked up a new 31' TT, and I setup the WDH myself - the TT is level, but the back of my Tundra drops about 6 inches, and it s...
Forum Discussion
BryanCory wrote:The hitch head needs to be tilted back. On most hitches this is done with washers.
I'm sure this has been covered, but hoping someone can help? We recently picked up a new 31' TT, and I setup the WDH myself - the TT is level, but the back of my Tundra drops about 6 inches, and it seems the spring-bars are not taking enough of the weight.
The spring-bars are just about level with the TT tongue, so I don't have any room to raise another chain link.
Any thoughts on where I need to make the adjustments? Do I drop/raise the entire assembly?
THANKS!
-Bryan
BTW, this is the primary way to set the tension. Taking up too many links can cause other issues. You need to have at least 5 links under tension.
