Weight distribution

I have been towing my 27’ trailer with just a factory trailer hitch and regular old ball setup. I have a 96 2500 Dodge and other then getting the slight amount of sway when a TT passes me it hasn’t been to bad. I have about 1k miles towing around last year. There was one road in PA that was like a washboard and made for a miserable 4 miles. I wonder if a wd hitch would help me out. I have aftermarket timbren bump stops on the truck and I think they touch, if not they are close.

I have towed with and without weight distribution with sway control as part of it. They do tow better. I used the Reese straight line system. Your headlights won't kill other drivers at night. I have never used the friction sway control.

With a small trailer like yours and a 3/4 ton truck, I wouldn't worry about sway control or weight distribution unless you experience problems in that area. I have owned three travel trailers, and only one of them had serious sway problems.

Like the hitch salesperson said, "Perception is reality". If one "thinks" the $500 hitch improves the towing experience, it will improve the towing experience. I have and will continue to use one when required. I will also leave the heavy, noisy, dirty, time consuming things behind when I don't need one.

2Bargos wrote:
Kinda off topic,but try it with A WDH installed.

Weight wise ,your setup and mine are very similar.I have an 06 F250 towing a 2008 cherokee bunk house thats close to the same weight that you are towing.

I've tried my both ways.My truck handles the trailer fine without any Weight Dist. Out of Curiosity I spent a couple hours one evening setting my hitch up.

the hitch when setup took a good towing setup and made it excellent.
Short answer ,,truck and trailer tows like its one solid unit and basically only thing you feel is the added weight.

No sway,no rear bounce on rough spots in road,etc

x2 on this

i have a 2017 f250 gasser towing a loaded to camp weight 33 ft TT at approx 7500 lbs

i have towed short distances with no wdh and sway with no problems. with a good wdh and sway bar setup it tows much better... feels and tows like one unit. eliminates the bounce and sway well worth the money regardless

Kinda off topic,but try it with A WDH installed.

Weight wise ,your setup and mine are very similar.I have an 06 F250 towing a 2008 cherokee bunk house thats close to the same weight that you are towing.

I've tried my both ways.My truck handles the trailer fine without any Weight Dist. Out of Curiosity I spent a couple hours one evening setting my hitch up.

the hitch when setup took a good towing setup and made it excellent.
Short answer ,,truck and trailer tows like its one solid unit and basically only thing you feel is the added weight.

No sway,no rear bounce on rough spots in road,etc

The "Gotta have a weight distributing hitch" thing got started and promoted back when we towed with sedans and station wagons. Is the OP towing with a 1958 Buick Roadmaster? If not, and all hitch and weight ratings are in order then it will tow great with a modern F-250, 2500HD, etc. Read your owner's manuals for advice and recommendations.

It would be much more meaningful if people included actual scale weights when they ask for hitch advice.

There are lawn mowers guys and contractors that pull large trailers without sway control. As stated, chains are usually needed for a ball connection type hitch.
I can say (with extreme knowledge!!!) travel trailers can use sway control.

“The hitch on my truck has a sticker that shows the same weight rating with or without weight distribution, 1500#” Never seen or heard of this. Please post a picture.

Might this be similar to “built in weight distribution?”

The hitch on my truck has a sticker that shows the same weight rating with or without weight distribution, 1500#. It is a 2 1/2" class 5 reciever.