Wet Bolt Installation
Hi All, Getting ready to install the MORryde UO12-016 wet bolts and have read with interest on the best way to orient the grease hole opening. It seems that 3 and 9 positions are the generally agr...
Forum Discussion
Of course it depends which end of the spring gets the 3 or the 9. If you are greasing the unloaded side, the grease will flow easily and do little or nothing.
Considering the OEM bolts were dry bolts and the OEM bushings were some kind of plastic, almost anything is much better. And, by following the Dexter wet bolt and new bushings instructions I think there can be comfort in longevity and function.
