What is that ladder thingy on the roof called...?

Ardvark- thanks for that referral... I have used RV surplus in the past but forgot to look on their website... appreciate the lead. I have 2 on the way.

Try this: https://factoryrvsurplus.com/product/ld-4600-die-cast-foot-pad/

I saw that universal kit and am not sure of the fit, so I am going to just clean up the existing ones as best I can.

I'll tell ;ya... I never use that Eterna Bind stuff. It don't hold and is a pain in the arse to remove. I spent about 4 hours prepping the roof today:

Before:




After:

I was looking for this a few years ago. The closest thing I could find was a ladder stand off kit like this. I don't know if the size is correct but it might get you in the right direction.

https://www.ebay.com/itm/Stromberg-Carlson-8535-RV-Ladder-Repl-Universal-Aluminum-Stand-Off-Kit-1pk/162878929098?epid=28017015549&hash=item25ec5738ca:g:IO8AAOSw4HNacUNs

look under camco rv parts they make things for rv,

For black iron pipe it's called a floor flange but the pipe screws in rather that uses a set screw. So maybe it's called a ladder roof flange. I can't recall seeing any loose parts without buying the ladder except at RV surplus stores.

I replaced two ladders on my neighbors 5th W in the past year, yes he backed it into his shed twice. Not sure of the mfgr. on all of them but the second was a stromberg carlson brand and all three had a screw that came up through the bottom of the flange and screwed into a threaded part that was pressed into the ladder tubes.

I searched on roof flange and didn't find anything either.

Reuse the old one and cover it with sealer.

edit: I found one for a 1" tube:

https://www.globalindustrial.com/p/storage/fittings-framing-rail/Kee-Klamp-Fittings/aluminum-flange?infoParam.campaignId=T9F&gclid=EAIaIQobChMI25qIwKi42wIVCb3sCh1SqA0uEAkYDiABEgLQtvD_BwE

There's also some 3/4 hardware on that page.

Ladder mount roof flange. or ladder thingie.