Forum Discussion
116 Replies
- MookieKatExplorerThat is funny! But good to know that it is made here.
So, Woodglue, would you say that trailers made with Azdel are higher quality that those who do not? - WoodGlueExplorerHanwa is a Korean Company. Azdel is manufactured in Virginia!
WoodGlue - MookieKatExplorerGosh! You are so knowledgeable! The name "Hanwa" sounds Korean. Is it made in Korea?
- WoodGlueExplorer
MookieKat wrote:
Are all Azdels pinch-rolled? The Coachman uses Azdel.
It's suggested by the Hanwa Company, the mfgs of Azdel, that it be pinch rolled. I'm not certain if Coachman does this or not to be honest!
WoodGlue - MookieKatExplorer
WoodGlue wrote:
Mike Up,
Not all aluminum framed trailers are gluing or vacuum bonding - Lance pinch rolls their sides w/ Azdel, a proven superior product, lighter and better and stronger than luaun or studded wood for that matter.
WoodGlue
Are all Azdels pinch-rolled? The Coachman uses Azdel. - MookieKatExplorerI am clueless about all these things...So, in conclusion...is it stronger to have the stick and tin?
- WoodGlueExplorerMike Up,
Not all aluminum framed trailers are gluing or vacuum bonding - Lance pinch rolls their sides w/ Azdel, a proven superior product, lighter and better and stronger than luaun or studded wood for that matter.
WoodGlue - Mike_UpExplorer
MookieKat wrote:
Is there an advantage to wooden studs and aluminum siding? Is it more green? Jayco claims to be green, so I am asking if there is a connection.
Jayco has stopped using some chemicals and as much chemicals to be more green. My Jayco has this stamp as well. It came from the Katrina trailers that supposedly made people sick while normal camping people never did get sick from their campers. Strange, but Jayco was proactive and stepped up their game. It's a good thing regardless. My none green 2008 Jay Flight 19BH smelled no different inside though. Just more liberal tree hugging nit picking. - Mike_UpExplorer
MookieKat wrote:
WoodGlue wrote:
You're looking at a "Stick & Tin" trailer aka: Aluminum Siding!
WoodGlue
Is that good or bad?
LinkMike Up's Post wrote:
I stay away from lightweight travel trailers now that I have a real tow vehicle. I looked at about 5 different models and even had a deal fall through right before I signed the papers because it's shoddy lightweight build was actually falling apart on the dealers showroom! I didn't realize how bad it was until we did a walk through with everything operating. Lightweights use "GLUED" or "VACUUMED" Styrofoam around cold/hot conducting aluminum frames, onto thin substrates as luan or other eco 1/16" thin boards. That in turn is glued (or vacuumed) again to decorative board on the inside and the thin fiberglass/gelcoat sheet on the outside. Laminated sandwiched walls. NO THANK YOU.
Since I've been paying more attention to these types of campers, I've seen 2 out of 3 with delamination (wall came unglued).
Plus the aluminum framing is conductive to allow condensation on the walls on certain models. PLUS some models use the aluminum framing around the borders and only have a few internal braces for windows with no normal studs. Then you have aluminum welds which are known to be weak. Ladder makers use rivets for strength as a feature over aluminum welding.
Plus these lightweights have lighter material inside as well. Walls flex around more, cabinetry is lighter and weaker, and believe it or not, even the floors and/or roofs are laminated on some models including "JAYCO". NO WAY!
I recommend the tried and true Aluminum sided stick and tin. In fact many are made with the same studs and wall framing as large mobile homes. I have family with them and they have lasted decades if maintained. If you want a camper to last, these are the ones. - MookieKatExplorerIs there an advantage to wooden studs and aluminum siding? Is it more green? Jayco claims to be green, so I am asking if there is a connection.
About Travel Trailer Group
44,056 PostsLatest Activity: Dec 27, 2025