Wheel Well Insulation Tape
Hello, In the wheel well I have some, what looks like insulation cover (it is thin and black), hanging down over the tire. What is the best way to tape it back up, or other than taping method, to re...
Forum Discussion
Jay Pat wrote:
My material was cut up a little from a blowout.
I used Windex to clean everything up. I'm talking, very clean.
Use Gorilla Tape.
Pressed the tape very firm to get a good "stick".
After about 3 years ago and still holding, very well.
Pat
I also had damage from a tire when the springs broke and the frame sagged. Amazingly, the tire survived 100 miles while rubbing against the wheel well! (cheap Chinese Powermax by the way) but the wheel well didn't. I cleaned it very well with degreaser then acetone and covered the damage with Eternabond tape. Seems to be lasting quite well, 2 years later.
