Who needs the Equalizer Tool to lift bars
I raised my L brackets one hole today to apply more weight to my steer axle. I was on level ground. I needed to use the tool to lift the bars onto the L Brackets. I could have gone higher with the ja...
Forum Discussion
So far I have used it only when on side to side uneven ground when one slips on without the lever and the other one won't. I just use the lever on the one that won't rather than raise the tongue jack even more. Other than that I manhandle both bars on by hand.
Speaking of tongue jacks - all that slow speed travel that seems to go on forever is getting pretty old. I will be investigating using my Fastway Flip or at least a plastic cone. I suspect the existing hole is too far from the end for the Flip.
Speaking of tongue jacks - all that slow speed travel that seems to go on forever is getting pretty old. I will be investigating using my Fastway Flip or at least a plastic cone. I suspect the existing hole is too far from the end for the Flip.
