Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
I had a cool but sunny day yesterday. 38F but 25-35mph breezes. So wind chill was near 25F. I took apart my closet area, mocked up the Atwood. Marked and cut the inner skin, then drilled and cut the outer skin. Then inserted the intake/exhaust sleeve and the exhaust pipe and bezel. All sealed and screwed in place. Then I cleaned up some window seems that the caulking was pulling away. Then did a lot of caulking.
Next is the wood work to mount the Atwood and reconfigure the closet and door. Only have a few weeks to get ready for our trip and I also have the plumbing and wiring....
As for the aluminum. The little pieces for the front window would be great. The one large outside pice for the chimney is the primary one of concern to delete the chimney. But I still need to buy the rivets and shaver...
One of these days I'll get to it but at least we can keep using it.
Off to church. See you all later!
Garry
Next is the wood work to mount the Atwood and reconfigure the closet and door. Only have a few weeks to get ready for our trip and I also have the plumbing and wiring....
As for the aluminum. The little pieces for the front window would be great. The one large outside pice for the chimney is the primary one of concern to delete the chimney. But I still need to buy the rivets and shaver...
One of these days I'll get to it but at least we can keep using it.
Off to church. See you all later!
Garry
