Repairing soft floor in my wolf creek
Well, after many many nights in my TC the 1/4” floor in my wolf creek is becoming soft in and around the kitchen area. Apparently the 1/4” floor can’t really accommodate my 200+ weight cooking in the...
Forum Discussion
Anutami wrote:
Pretty sure the top layer of 1/4" luan has weakened and its pushing into the foam layer. The underside luan portion is holding strong. I think the only way to tackle this is from the top side.
....I think that you nailed the issue 100%. The "floor sandwich"....top layer of Lauan/ply is simply deflecting into the bead-board because not enough aluminum cross-members are there to resist deflection, and walking (a foot is a small footprint) compresses the bead-board...permanently.
Just lay down a dense/thick (deflection resistant) bamboo (rot-proof) interlocking floor over the vinyl.
