pianotuna wrote:
I hate the interstates, as I drive slowly to conserve fuel and funds.
If the goal is to conserve fuel and funds, interstates are your best option (assuming they are connecting your start and end point in a relatively direct route).
- A nice steady speed (even if faster) will typically be more efficient than stop and go or slowing for lots of sharp curves. (Just look at MPG ratings...highway is almost always better than city)
- Also, that braking will result in more wear and tear vs smoothly humming along.
- Harder to define but non-interstate driving you are around 50 times more likely to get into a crash...which tends to be expensive.
As someone else mentioned, Google Maps has a setting to avoid highways but once you leave the highways, it's smart to look at the proposed route before heading out in the morning. Generally if you stick to "US" or State Routes, you will be OK (not always but most of the time). When you get down to county and/or local roads, it's much less reliable.
Another key issue is construction. There is a lot of time/money/effort put into limiting delays on interstates. You still get a fair amount of effort on major arterials but the further down the food chain you move, the more likely there is minimal effort put in. That may put you on very long and/or questionable detour routes. Google Maps will generally show you and/or avoid them. A paper map will show it as smooth sailing.
Another trick, is to jump into Street View and look around (particularly if it looks twisty turny or otherwise questionable).
Some of this varies based on the type of RV.
- With a truck camper, you can back out or turn around on some pretty marginal roads. So winging it is much more viable.
- A big diesel pusher flat towing or a 40ft 5er and if you get a couple miles down an inappropriate road...your options are far worse.
Honestly, don't get the obsession with avoiding the interstate system. We drive the roads that get us where we want to go. Sometimes that's interstates...sometimes it's not.