Forum Discussion
Tango__AE7UI
Jan 13, 2015Explorer
I bought the kit and had to remove about 1-1/2" to allow them to fit between the tandem axels.
I was able to leave a bunch of blocks at home so that saved space in the pass through storage.
I don't like the plastic step. It is very slick so unless I modify it, it probably will not be used.
I was able to leave a bunch of blocks at home so that saved space in the pass through storage.
I don't like the plastic step. It is very slick so unless I modify it, it probably will not be used.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,352 PostsLatest Activity: Jan 20, 2025