Forum Discussion
westend
Feb 02, 2017Explorer
Combiner box made from a 2" LB, the solar panel wiring is lead through a weatherproof box entry fitting. The two buses are fastened into UHDP standoffs (fastened from below) and everything is epoxied in place:
(I have # 4 from the combiner box piped on the exterior of the trailer sidewall, to the controller location).


Bus box made from 4" weatherproof junction box. The drilled and threaded 3/16" x 3/4" copper bar is fastened as above:

(I have # 4 from the combiner box piped on the exterior of the trailer sidewall, to the controller location).


Bus box made from 4" weatherproof junction box. The drilled and threaded 3/16" x 3/4" copper bar is fastened as above:

About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,353 PostsLatest Activity: Mar 10, 2025