Anybody replaced the decals/graphics on their RV themselves? Mine look horrible and would love to replace them. Some of the old adhesive though is so dried out and baked on by the sun that Goo Gone an...
I removed and replaced all the graphics on my 5th wheel in 2019. The surface was filon not aluminum. A heat gun on low will work, but I found that a hair dryer on low was better as the heat gun will easily heat the decals too much and cause them to stretch and break easily. I removed the glue with Rapid Remover which worked very well.
It's a LOT of work and the replacement graphics were not cheap.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,353 PostsLatest Activity: Feb 14, 2025