Forum Discussion
Blacklane
May 12, 2017Explorer
My 20-foot trailer came with a 4000-lb Bulldog jack. One time I retracted the jack to its top limit and an internal gear broke and the jack was beyond repair. As an engineer myself, I would never release a design that can destroy itself in routine use.
I replaced it with a 4500-lb Husky jack, which has been installed for several years now.
As I recall, I did nothing to the mounting holes and the jacks were interchangeable.
I think the Bulldog had a 22-inch travel over the Husky's 18-inch travel, but I have never missed the extra 4 inches. I usually use a 4-inch wooden jack pad anyway.
I replaced it with a 4500-lb Husky jack, which has been installed for several years now.
As I recall, I did nothing to the mounting holes and the jacks were interchangeable.
I think the Bulldog had a 22-inch travel over the Husky's 18-inch travel, but I have never missed the extra 4 inches. I usually use a 4-inch wooden jack pad anyway.
About DIY Maintenance
RV projects you can tackle on your own with a few friendly pointers.4,351 PostsLatest Activity: Jan 13, 2025